iVw4-H Standalone Video Wall Controller
iVw4-H Standalone Video Wall Controller - iVw4-H Features PDF Print E-mail
Product Index
iVw4-H Standalone Video Wall Controller
iVw4-H Features
iVw4-H Specification
All Pages
Page 2 of 3

 

The features of the iVw4-H Video Wall Controller include:

  • Fan Less design for any implementation
  • Provide 1 image source input Dual-link and 4 DVI outputs to  four (1x4) monitors
    1. Display mode choice (clone, Full Mode)
    2. Support (1x2), (1x3), (1x4) output selection
    3. Software OSD control
    4. GeniMASKTM bezel masking function
The iVw4-H Video Wall Controller supports various display modes that include:
 
  • Clone mode (1x1): The iVw4-H unit displays the same content on the four screens
  • Full mode (1x4): The iVw4-H unit divides the input image into four sections and places each 1/4 image
    per screen to fit to the     selected resolution on each monitor. The full display also support mask enable
    and disable     .  
  • Up to 4096x768 Dual-Link DVI input and up to 4 * 1024x768 outputs per display
  • On Screen Display/Remote control functions for selecting; Display mode; Output resolution; Border
    mask enable/disable and frame wideness adjustment. 
  • Bezel mask or screen border adjustment, this is quite an important function, normally the display
    will be 'staggered" from screen to screen due to the use of conventional LCD/Plasma displays, but
    with this function you can adjust the display to be seamless, e.g mask-out the screen bezel enabling
    a visually seamless display.
 
 
  • RS-232 communication for remote control (if required) 
  • Easy-DIY to install and control the videowall or multi-screens, either from a PC, Laptop, Remote
    control or Front Panel.
  • Multiple units can be used for larger screen configurations, e.g. by installing a dual channel graphics
    card into a PC then two iVw4-H's can be connected to enable a 1x8 video wall / multi-screen display
    or one iVw4-H can be cascaded to four further units to enable a 1x16 videowall / multiscreens.
    All iVw controllers can be "mixed & Matched" to enable various display configurations.
  • Optional Live DVI/VGA video insertion, the iXwRGB (optional purchase) can be installed within
    the PC that controls the iVw4, this will enable  not only a videowall/multi-screen display with all of
    Windows applications, but also live video from other sources that provide DVI or VGA outputs, such
    as Servers, Workstations, Hdmi players, DVI cameras etc..

 

 

Support Various Display Modes


Display Modes Selection:-

Full Mode

 

 

 

Vertical Mode

- Full Mode (2x2)

The iVw4-H divides the input image into four sections and stretch the 1/4 image to fit to the selected resolution on each monitor.  The full display also support mask enable and disable.

 

 ** Portrait Mode is also supported, eg. Screens can be rotated by 90 degrees.

 

 



 

iVwQ-MX Quad Video Processor

 

The iVw-Quad Video Processor is an advanced video processor for multimedia presentations. It is an ideal solution for applications where up to four video signals must be displayed on a single display.

iVwQ-MX supports 10 video inputs, of which four can be outputted simultaneously with the desired display layout through software control

Click here for more info

 

 

NOW AVAILABLE

Video Wall, Multi Screen
Graphics Controller.

High Performace 2D and 3D Graphics

  • No restrictions on position or size of overlay windows 

  • Up to 10 cards per system for a maximum of 40 displays

  • High performance DMA image load. (720MB/s

 

iVwQ4 4 Display Videowall

 
iVwQ4 4 Display, 4x DVI from 640x480 to 1920x1200, each DVI has an independent controllable display.  Can be cascaded to obtain more displays.  PIP, PAB, full screen modes and adjustable size & position.  Resize, position, flip, zoom & pan and blend output video.