• Fan-less design for any implementation
• Provide 1 image source input (DVI/Component) and 4 DVI outputs to four (2x2) monitors
  
  
  
  
  
  
  
  
  

iVw4 video wall controller supports various display modes that include:

• Clone mode (1x1): The iVw4 unit displays the same content on the four screens
• Full mode (2x2): The iVw4 unit divides the input image into four sections and stretch the ¼ image to
  fit to the selected resolution on each monitor. The full display also support mask enable and disable
• Vertical Replication mode (1x2): The iVw4 can project the same image on the top two LCD panels
  and bottom two LCD panels. Use only two LCD panels to create a larger display, effectively here the
  videowall can be split into two sections, each being 1x2 installed on opposite walls with the same display view.  
• Up to 1920x1200 pixel Hi-Def input and up to 1920x1200 output per display
• On Screen Display/Remote control functions for selecting; Display mode; Output resolution; Border mask enable/disable and frame wideness adjustment. 
• Bezel mask or screen border adjustment, this is quite an important function, normally the display will be staggered" from screen to screen due to the use of conventional LCD/Plasma displays, but with this function you can adjust the display to be seamless, e.g mask-out the screen bezel enabling a visually seamless display.
• RS-232 communication for remote control (if required)
  

• Easy-DIY to install and control the videowall or multi-screens, either from a PC, Laptop Remote control or front panel.
• Multiple units can be used for larger screen configurations, e.g. by installing a dual channel graphics card intoa PC then two iVw4's can be connected to enable a 4x2 video wall or multi-screen display or one iVw4 can be cascaded to four further units to enable a 4x4 videowall / multiscreens. All iVw controllers can be "Mixed & Matched" to enable various display configurations.

• Optional Live DVI/VGA video insertion, the iXwRGB (optional purchase) can be installed within the PC that controls the iVw4, this will enable  not only a videowall/multi-screen display with all of Windows applications, but also live video from other sources that provide DVI or VGA outputs, such as Servers, Workstations, hdmi players, DVI cameras etc..
  

Support Various Display Modes:

Display Modes Selection:

Full Mode

 Vertical Replication Mode

- Clone Mode (1x1):

 - Full Mode (2x2):

The iVw4 divides the input image into our sections and stretch the 1/4 imageto fit to the selected resolution each monitor. The full display also support mask enable and disable.

 - Vertical Replication Mode (1x2): 

The iVw4 can project the same image on the top two LCD panels and bottom two LCD panels. Customers can require only two LCD panels to create a larger
display.